|
|||||||
| PROZONE PRODUCTS | |||||||
PZ4 Ozonator Venturi Driven Ozonator For Small In-Ground Pools or
Above-Ground Pools up to 15,000 Gallons The PZ4 has a dual-cavity, rugged
anodized aluminum, line-grounded case that stands vertically. It can
be attached to the pack or mounted on the wall. Under certain conditions
it can even be set on the ground. Air is supplied to the unit through
filtering slots on the bottom to prevent insects from getting inside
the unit. The electrical system is completely insulated internally in
a separate sealed housing, and the ballast is mounted high above the
base. In the event water inadvertently enters the ozone chamber, it
simply runs past a completely insulated arc assembly and out through
the slotted input filter. |
|
||||||
PZ7-2HO Ozonator Prozone ( http://www.prozoneint.com ) has incorporated several design changes into the PZ7 line which will enhance the product’s value, make stocking the product simpler, and increase its marketability Prozone ( http://www.prozoneint.com
) is combining the PZ7 product line to one universal model. This patented
system has two corona hybrid arc tubes which provide a combination of
very ultraviolet and corona discharge ozone generation technologies
for pools up to 144 m3 (40,000 gal). |
|
||||||
PZ2-4V Ozonator Prozone ( http://www.prozoneint.com
) adds a non-compressor model to its offerings for the large and heavy-duty
pool and spa market. The new model PZ2-4V operates using a venturi
bypass or external compressor only, and is suitable for a broad range
of applications, including commercial, institutional and residential.
Model Description Prozone ( http://www.prozoneint.com
) has modified the PZ2-4 compressor-driven ozonator. The new PZ2-4V
venturi system has four Prozone patented Corona Hybrid cartridges,
and produces 2 grams of pure ozone per hour. Ozone Injection New Saddle Clamps |
|
||||||
| |
|||||||
MONCOL POOL & SPA |
|||||||